Rated Current	Part Number	DC Resistance (mΩ)	Earth Leakage* (A)	Length (mm)	Width (mm)	Height (mm)	Approximate Weight (kg)
32A	DS23333	10	2.20	550	410	95	22
63A	DS23335	6	2.7	550	410	110	32
100A	DS23337	4	3.15	660	410	135	45
200A	DS23709	2	6.3	660	575	150	70
250A	DS30929	0.5	6.3	1020	575	200	100
400A	DS26051	0.3	6.30	1250	575	150	120
800A	DS50026A	0.2	3.15	1800	864	285	250
800A	DS50026C	0.2	3.15	1700	864	285	250
1200A	DS50027A	0.1	3.65	2200	1000	300	300
1200A	DS50027C	0.1	3.65	1900	1000	300	300
1200A	DS50027A	0.1	3.65	2200	1000	300	300
1200A	DS50027C	0.1	3.65	1900	1000	300	300

Rated Voltage

• 250VAC (SP&N) 50/60Hz
• 440/250VAC (TP&N) 50/60Hz

Alternative Voltage

• Also suitable for 208/120VAC and 480/277VAC
• Alternative surge arrestors may be required.
• TP&N filters are also suitable for three phase supplies without neutral. In such installations, the neutral terminal should be left unconnected.

Rated Current

• 6A to 1200A (each individual line, see table)

Current Overload

• 10 x maximum rated current for 1 sec.
• 1.5 x max rated current for 10 minutes.

Discharge time

• 30 seconds to below 30V (filter incorporates discharge resistors)
• If sockets or plugs are used for connection, ensure that no pins or un-insulated parts are accessible by none qualified personnel upon removal.

Temperature Rise

• 25°C case rise on full load

Temperature Range

• -45°C to +85°C Storage
• -45°C to +50°C Working

MTBF

• >0.8 million hours (calculated using Mil Hdbk 217D)

Surge Suppression (optional)

• 275VAC at 215J 10kA 8/20μs
• All filters can be supplied with an integral metal-oxide varistor, fitted between each input terminal and earth. Add a suffix “V” to end of part code.

Screened Rooms, Server Supplies & EMC Test Chambers

Meets TEMPEST requirement for power filters to NATO SDIP 29/1

Supports compliance to MIL STD 461 & DEF STAN 59 411

All MPE installation filters are tested using the test methods defined within the following standards and meet or exceed the relevant performance and/or safety criteria defined within these standards:

• Mil-F-15733
• Mil-Std-220C
• CISPR17:2011/BS EN 55017:2011
• UL1283
• LVD 2014/35/EU
• NATO STANAG 1008 Ed.9 shipboard supplies
• DEF-STAN 59-411/MIL-STD-461
• RoHS (2011/65/EU) & LVD (2014/35/EU)
• UKCA & CE

MPE Part Code	Description	NSN
DS23752	16A Single Phase	5915-99-968-7487
DS23332	32A Single Phase	5915-99-176-8426
DS23334	63A Single Phase	5915-99-152-3079
DS23336	100A Single Phase	5915-99-391-4527
DS23708	200A Single Phase	5915-99-156-5318
DS26050	400A Single Phase	5915-99-847-7146
DS23619	6A Three Phase	5915-99-291-1718
DS23331	10A Three Phase	5915-99-377-6256
DS23333	32A Three Phase	5820-99-570-1166
DS23335	63A Three Phase	5915-99-371-3551
DS23337	100A Three Phase	5915-99-671-1575
DS23709	200A Three Phase	5915-99-959-4382
DS30929	250A Three Phase	5915-99-918-6144
DS26051	400A Three Phase	5915-99-845-4990

DS XXXXX / X / X

• Filter Part Number
• Suffix C for standard cable entry
• For other cable entries, see Installation Details page
• Add suffix V for transient suppressed filter

e.g. DS23330CV

Power Line Filters Upto 2400A - Issue 12