MPE
MPE Limited
Hammond Road
Knowsley Industrial Park Liverpool
L33 7UL
Contact
T: +44 (0)151 632 9100
E: sales@mpe.co.uk

Single Line AC Filter Range – Rectangular

Single line AC power line filters packaged in a rectangular case designed for bulkhead mounting. Suitable for voltages up to 250VAC 50/60Hz, they are particularly suited to high current power and control line applications where the return current has to return via a different route.

Insertion Loss Performance

Asymmetric attenuation shown as measured in 50Ω system, at all loading conditions, in accordance with CISPR-17.
Performance curve meets 100dB from 10kHz to 10GHz.

Rated Current
(A)		Part NumberDC Resistance
(mΩ)		Earth Leakage
(A)		Length
(mm)		Width
(A)		Height
(mm)		Approx. Weight
(kg)
32DS26396303.870013011020
63DS26397155.785013011025
100DS26398106.6100016013035
200DS2639959.4120020015060

Rated Voltage

  • 250VAC

Alternative Voltage

  • Also suitable for 277VAC 50/60Hz or 600VDC
  • Alternative surge arrestors may be required.

Rated Current

  • 6A to 200A (each individual line, see table)

Current Overload

  • 10 x maximum rated current for 1 sec.
  • 1.5 x max rated current for 10 minutes.

Discharge time

  • Max. 60 seconds to below 34V (filter incorporates discharge resistors)

Temperature Rise

  • 25°C case rise on full load

Storage Temperature Range

  • -45°C to +85°C Storage
  • -45°C to +50°C Working

MTBF

  • >0.8 million hours (calculated using Mil Hdbk 217F)

Surge Suppression (optional)

  • 270VDC at 140J (8/20μs)
  • All filters can be supplied with an integral metal-oxide varistor, fitted between the input terminal and earth (case).
  • Military power supplies
  • IT & Telecomms, base stations, server supplies & racks
  • Screened rooms & EMC test chambers
  • Supports compliance to MIL-STD-461 & DEF STAN 59-411
    • All MPE installation filters are tested using the test methods defined within the following standards and meet or exceed the relevant performance and/or safety criteria defined within these standards:
    • Mil-F-15733
    • Mil-Std-220C
    • CISPR17:2011/BS EN 55017:2011
    • UL1283
    • LVD 2014/35/EU
    • DEF-STAN 59-411/MIL-STD-461
    • RoHS (2011/65/EU) & LVD (2014/35/EU)
    • UKCA & CE
    DS XXXXX / X / X
    • Filter Part Number
    • Suffix C for standard cable entry
    • For other cable entries, see Installation Details page
    • Add suffix V for transient suppressed filter
    e.g. DS26395CV
    Specialist EMI Power Line Filters - Issue 2

    DS XXXXX / X / X

    • Filter Part Number
    • Suffix C for standard cable entry
    • For other cable entries, see Installation Details page
    • Add suffix V for transient suppressed filter

    e.g. DS26395CV