MPE
MPE Limited
Hammond Road
Knowsley Industrial Park Liverpool
L33 7UL
Contact
T: +44 (0)151 632 9100
E: sales@mpe.co.uk

AC Equipment Filters

DESCRIPTION

A range of high performance AC power input filters for filtering incoming power to sensitive or noisy equipment.

RATINGS & CHARACTERISTICS

Rated Voltage 250V ac 50/60Hz, 250Vdc
Test Voltage (line – earth) 2250V dc
(line – line) 1250V dc
Rated Current, IR As tabulated
Insertion Loss See graph
Maximum Volt Drop per line at full load dc current 250mV
Maximum Full Load Heat Dissipation As tabulated
Discharge Time to below 34V 2s maximum
Maximum Temperature Rise at Full Load 25ºC
Ambient Temperature Range -25ºC to +85ºC
Climatic Category 25/85/21
Maximum Leakage Current (at 250V 50Hz) 0.4mA

PRODUCT RANGE

Part Number Current Rating IR (A) @50ºC* Maximum Heat Dissipation (W) Major Dimensions (mm) Weight (g)
Length A Width B Depth C
DS26770 1 0.15 51 51 32 170
DS26771 3 1.5 51 51 32 170
DS26772 6 3.5 64 56 38 260
DS26773 10 2.0 88 60 38 440
DS26774 15 4.5 88 60 38 440

 *Current derating between 50ºC and 85ºCFor temperature, θ Iθ = IR

DIMENSIONS & MECHANICAL DETAILS

Part Number
A B C D E F G H J K L M N P Q R
DS26770, DS26771  51  51  32  13  16  17.5  21.5  18  7  –  –  37  7  10.5
DS26772 64 56 38 13 18 19 25 22 7 40 8 12.5
DS26773, DS26774 88 60 38 11 13 20 20 25 20 9 35 12.5 94 44 8 12.5

SAFETY

All high performance filters contain capacitors which will store charge even after the power has been removed from the filter. All ac filters listed are fitted with internal discharge resistor networks. These are intended to discharge the capacitors to a safe level within two seconds of switching off the power.

As an added precaution, after removing the power, filter terminals should always be shorted to earth (filter case) and to each other, before touching. A good low impedance earth connection must be  made to the filter.